Appearance Name Quantity (PCS)
Switch lever 1
Battery module
fastener
17
PP sheet 4
Step 4 After conrming that the cabinet is intact, remove the L-shaped bracket that
secures the cabinet and pallet, and secure the sliding plate to the pallet using the
M12 screws that you have removed.
Figure 5-3 Removing L-shaped brackets
SmartLi 3.0
User Manual (Short-Term Backup Power) 5 Installation and Cable Connection
Issue 10 (2024-01-31) Copyright © Huawei Digital Power Technologies Co., Ltd. 64
To Next Page
Loading...
