Huawei SUN2000-3KTL-M1 User Manual

3 Storage
The following requirements should be met if the SUN2000 is not put into use
directly:
● Do not unpack the SUN2000.
● Keep the storage temperature at –40°C to +70°C and the humidity at 5%–
95% RH.
● The SUN2000 should be stored in a clean and dry place and be protected
from dust and water vapor corrosion.
● A maximum of eight SUN2000s can be stacked. To avoid personal injury or
device damage, stack SUN2000s with caution to prevent them from falling
over.
● Periodic inspections are required during the storage. Replace the packing
materials if necessary.
● If the SUN2000 has been long-term stored, inspections and tests should be
conducted by
qualied personnel before it is put into use.
SUN2000-(3KTL-10KTL)-M1
User Manual 3 Storage
Issue 02 (2020-11-20) Copyright © Huawei Technologies Co., Ltd. 17

Huawei SUN2000-3KTL-M1 Specifications

General

Model	SUN2000-3KTL-M1
Type	String Inverter
Max. DC Input Voltage	600 V
MPPT Voltage Range	90 V - 560 V
Rated AC Output Power	3000 W
Max. AC Output Power	3300 W
Nominal AC Voltage	220 V / 230 V / 240 V
AC Voltage Range	180 V - 280 V
AC Output Frequency	50 Hz / 60 Hz
Max. Efficiency	98.6%
MPPT Trackers	2
DC Inputs per MPPT	1
Max. Input Current per MPPT	11 A
Operating Temperature Range	-25°C to +60°C
Cooling Method	Natural Convection
Protection Degree	IP65
Max. DC Input Power	4500 W
Communication	RS485
Dimensions (W x H x D)	365 mm x 365 mm x 156 mm