Huawei SUN2000-3KTL-M1 User Manual

C Resetting Password
Step 1 Ensure that the SUN2000 connects to the AC and DC power supplies at the same
time. Indicators
and are steady green or blink at long intervals for more than
3 minutes.
Step 2 Perform the following operations within 3 minutes:
1. Turn o the AC switch and set the DC switch at the bottom of the SUN2000
to OFF. If the SUN2000 connects to batteries, turn
o the battery switch. Wait
until all the LED indicators on the SUN2000 panel turn o.
2. Turn on the AC switch and set the DC switch to ON. Ensure that the indicator
is blinking green at long intervals.
3. Turn o the AC switch and set the DC switch to OFF. Wait until all LED
indicators on the SUN2000 panel are
o.
4. Turn on the AC switch and set the DC switch to ON. Wait until all indicators
on the solar inverter panel blink and turn
o 30 seconds later.
Step 3 Reset the password within 10 minutes. (If no operation is performed within 10
minutes, all inverter parameters remain unchanged.)
1. Wait until the indicator
blinks green at long intervals.
2. Obtain the initial WLAN hotspot name (SSID) and initial password (PSW)
from the label on the side of the SUN2000 and connect to the app.
3. On the login screen, set a new login password and log in to the app.
SUN2000-(3KTL-10KTL)-M1
User Manual C Resetting Password
Issue 02 (2020-11-20) Copyright © Huawei Technologies Co., Ltd. 110

Huawei SUN2000-3KTL-M1 Specifications

General

Model	SUN2000-3KTL-M1
Type	String Inverter
Max. DC Input Voltage	600 V
MPPT Voltage Range	90 V - 560 V
Rated AC Output Power	3000 W
Max. AC Output Power	3300 W
Nominal AC Voltage	220 V / 230 V / 240 V
AC Voltage Range	180 V - 280 V
AC Output Frequency	50 Hz / 60 Hz
Max. Efficiency	98.6%
MPPT Trackers	2
DC Inputs per MPPT	1
Max. Input Current per MPPT	11 A
Operating Temperature Range	-25°C to +60°C
Cooling Method	Natural Convection
Protection Degree	IP65
Max. DC Input Power	4500 W
Communication	RS485
Dimensions (W x H x D)	365 mm x 365 mm x 156 mm