Huawei SUN2000-3KTL-M1 User Manual

Indicators Status Remarks Description
Blinking at long
intervals (on for 1s
and then o for
1s)
The Smart Dongle
fails to be connected
to a management
system because the
SIM card has no
signals, weak signal
strength, or no
trac.
If the Smart Dongle
is reliably connected,
check the SIM card
signal through the
SUN2000 app. If no
signal is received or
the signal strength is
weak, contact the
carrier. Check
whether the
tari
and trac of the SIM
card are normal. If
not, recharge the SIM
card or buy
trac.
Blinking red
and green
alternatively
Blinking at long
intervals (on for 1s
and then o for
1s)
No communication
with the SUN2000
– Remove and then
insert the Smart
Dongle.
– Check whether the
SUN2000 matches
the Smart Dongle.
– Connect the Smart
Dongle to another
SUN2000.
Check whether the
Smart Dongle is
faulty or the USB
port of the
SUN2000 is faulty.
----End
SUN2000-(3KTL-10KTL)-M1
User Manual 6 Commissioning
Issue 02 (2020-11-20) Copyright © Huawei Technologies Co., Ltd. 66

Huawei SUN2000-3KTL-M1 Specifications

General

Model	SUN2000-3KTL-M1
Type	String Inverter
Max. DC Input Voltage	600 V
MPPT Voltage Range	90 V - 560 V
Rated AC Output Power	3000 W
Max. AC Output Power	3300 W
Nominal AC Voltage	220 V / 230 V / 240 V
AC Voltage Range	180 V - 280 V
AC Output Frequency	50 Hz / 60 Hz
Max. Efficiency	98.6%
MPPT Trackers	2
DC Inputs per MPPT	1
Max. Input Current per MPPT	11 A
Operating Temperature Range	-25°C to +60°C
Cooling Method	Natural Convection
Protection Degree	IP65
Max. DC Input Power	4500 W
Communication	RS485
Dimensions (W x H x D)	365 mm x 365 mm x 156 mm