HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 7-1 Administrator password parameters
Current password
New password
Confirm
password
Specifies the new administrator
password for the remote controlled UI.
The default value is
12345678.
The password contains 8 to
32 characters.
To improve device security,
set a password at your first
login.
Encryption
advanced settings
Specifies whether to encrypt the
Advanced Settings screen of the
remote controlled UI.
If this parameter is enabled, you must
enter the administrator password to
access the Advanced screen. If this
parameter is disabled, the
administrator password is required
only when you select Settings on the
Advanced screen.
This parameter is not
selected by default.
Step 2 Select Save.
----End
7.2 Enabling Encryption
On an IP network, which is neither quality-guaranteed nor secure, encryption can be used to
increase video communication security.
Background
Encryption can be H.235 or SRTP encryption.
Both parties involved in communication must support encryption; otherwise, encryption fails.
Procedure
Step 1 Choose Advanced > Set > Security > Encryption and select an encryption policy.
Disable: No stream is encrypted.
Enable: Stream encryption is mandatory. If you select this option, the endpoint can only
attend encrypted conferences. If a remote site is also encryption capable, an encrypted
conference is initiated upon successful call connection with the remote site. If the remote
site is encryption incapable, the call to the remote site fails.
Maximum interconnectivity: Media streams are encrypted only when a call is set up. If
you select this option for the local site, the conferences between the local and remote
sites are not encrypted only when Disable is selected for the remote sites.
Step 2 Choose Save.
To Next Page
Loading...
Need help?
General
