Huawei TE40 Administrator's Guide

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
13 Feature Configuration
Issue 01 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
142
Choose Advanced > Settings > General. Set the number keys and power key, which are
described in Table 13-1.
Table 13-1 Number keys and power key on the remote control
Parameter
Description
Setting
Select number key function
Select number
key function
Specifies the functions of the number keys
on the remote control.
When the endpoint is not in a conference and
the display is showing the menus or camera
control screen, you can only control camera
presets by pressing number keys on the
remote control.
When the endpoint is in a conference, you
can select either of the following options:

Second Dial: Follow the instructions to
press number keys to perform two-stage
dialing.

Control camera preset: On the menus or
camera control screen, press a number
key to move the camera to the preset
bound to that key.
The default value is
Second Dial.
To toggle between
these two options,
press on the
remote control.
Power supply
Shut Down
Specifies whether the endpoint can be
powered off.
If you set this parameter to Disable, pressing
on the remote control can only restart
the endpoint or place it in sleep mode.
The default value is
Enable.
13.2 Setting the Parameters for Placing and Answering
Calls
You can set the mode in which the endpoint places and answers calls. For example, you can
set the endpoint to automatically answer calls or to enable the do not disturb function.
Choose Advanced > Settings > Conference > Normal. Set the parameters described in Table
13-2.
Table 13-2 Parameters for placing and answering calls
Parameter
Description
Setting
Answer Mode
Specifies how your endpoint handles
incoming calls.
The default value is
Manual.

Huawei TE40 Specifications

General

Brand	Huawei
Model	TE40
Category	Conference System
Language	English