Huawei TE40 Administrator's Guide

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
3 Network
Issue 01 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
28
Parameter
Description
Setting
Certificate.
Video
request
handling
Specifies how your endpoint handles
video requests from a remote endpoint
during a point-to-point SIP audio call or
multipoint conference.

Accept automatically: Your
endpoint automatically accepts video
requests from the remote endpoint.

Reject automatically: Your endpoint
automatically rejects video requests
from the remote endpoint.

Manual: Your endpoint prompts you
to accept video requests from the
remote endpoint.
The default value is Manual.
Step 2 Select Save.
----End
3.1.5 Setting Wi-Fi Parameters
To use your endpoint to implement video communication over a Wi-Fi network, set the Wi-Fi
parameters.
Setting Wi-Fi Client Parameters
When the Wi-Fi client function is enabled, your endpoint functions as a Wi-Fi client and
access an available Wi-Fi network after connecting to a wireless router.
Step 1 Choose Advanced > Settings > Network > Wi-Fi > Wi-Fi Client. Select Enable for the
Wi-Fi Client parameter.
Your endpoint automatically scans for available wireless routers and lists them in the
Wireless access point list box.
If you need to set a static IP address for your endpoint, go to Step 2. Otherwise, go to Step 4.
Step 2 Select Advanced. On the displayed Advanced Wireless Settings screen, set IP parameters
described in Table 3-6.
Table 3-6 Wi-Fi parameters
Parameter
Description
Setting
Connection type
Specifies the mode in which
the endpoint obtains an IP
address.

Static IP: The network
administrator assigns an
IP address to the
The default value is
Dynamic IP.
Select Dynamic IP unless
special network
requirements are imposed.

Huawei TE40 Specifications

General

Brand	Huawei
Model	TE40
Category	Conference System
Language	English