EasyManuals Logo

Huawei TE40 Administrator's Guide

Huawei TE40
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
3 Network
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Parameter
Description
Setting
server domain name, set this parameter
to the IP address bound to that domain
name.
Site number
Specifies the site number for your
endpoint. If your endpoint registers with
a SIP server, endpoints that also register
with the SIP server can dial this site
number to call your endpoint.
Enter a value containing any of
the following: letters, digits,
special characters such as @
# %.
Example: 12345
User name
Specifies the user name for
authentication registration.
Example: ab3@
Obtain the value of this
parameter from the SIP server
administrator.
Password
Specifies the password that your
endpoint uses to register with a SIP
server.
For successful authentication on a SIP
server, this password set on your
endpoint must be the same as that set on
the SIP server.
Obtain the value of this
parameter from the SIP server
administrator.
Server type
Specifies the SIP server type.
OCS: Select this option if your
endpoint registers with the Microsoft
Office Communications Server
(OCS) or Microsoft Lync Server.
CISCO VCS: Select this option if
your endpoint registers with the Cisco
TelePresence Video Communication
Server (VCS).
Standard: Select this option if your
endpoint registers with other SIP
servers.
The default value is Standard.
Transmissio
n type
Specifies the protocol used for SIP
signaling transmission.
TCP: Use the Transmission Control
Protocol (TCP) to implement
transmission reliability.
UDP: Use the User Datagram
Protocol (UDP) to implement
transmission with reduced latency.
TLS: Use Transport Layer Security
(TLS) to implement transmission
security. If you select this option, you
can import a root certificate from the
Web interface when your endpoint
registers with a SIP server. For
details, see 9.3.7 Importing a
The default value is UDP.

Table of Contents

Other manuals for Huawei TE40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei TE40 and is the answer not in the manual?

Huawei TE40 Specifications

General IconGeneral
BrandHuawei
ModelTE40
CategoryConference System
LanguageEnglish

Related product manuals