Huawei TE40 Administrator's Guide

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
3 Network
Issue 01 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31
Parameter
Description
Setting
Encryption
mode
Specifies the encryption method used on
the Wi-Fi network. The required key
types vary depending on your settings of
this parameter. If you set Encryption
mode to NONE, the Wi-Fi network
provided by your endpoint is open to
everyone.
Default value: NONE
Specifies the password used by other
devices to connect to your endpoint.
The required password varies
depending on your settings of
Encryption mode. If you set
Encryption mode to NONE,
the Wi-Fi network provided by
your endpoint is open to
everyone.
Local IP
address
Subnet mask
Specify the IP address and subnet mask
of your endpoint.
Default values:

Local IP address:
192.168.2.1

Subnet mask:
255.255.255.0
DHCP
Specifies whether your endpoint assigns
IP addresses to devices connected to it.
NOTE
If you select this parameter, you must also set
Start IP address and End IP address.
This parameter is selected by
default.
Start IP
address
End IP
address
Specify the IP address segment for the
devices connected to your endpoint.
Default values:

Start IP address:
192.168.2.10

End IP address:
192.168.2.100
Step 3 Select Save.
In the Connected devices list box, you can view the MAC and IP addresses of all the devices
connected to your endpoint.
----End
3.2 Connecting to a 4E1 Network
Only the TE60 supports 4E1 functions. To implement video communication over a 4E1-line
dedicated network, you must connect the TE60 to the network.

Huawei TE40 Specifications

General

Brand	Huawei
Model	TE40
Category	Conference System
Language	English