Huawei TE40 Administrator's Guide

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
13 Feature Configuration
Issue 01 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
143
Parameter
Description
Setting

Manual: Your endpoint prompts you to
handle a call when the call comes in.

Answer call automatically: Your
endpoint automatically answers
incoming calls when not being used in a
conference.
Mute local
audio for
answered calls
.
This parameter is available only when
Answer Mode is set to Answer call
automatically.
Specifies whether the endpoint turns off all
sounds generated at your site when your
endpoint joins a conference. If you enable
this parameter, no remote site can hear your
site.
This parameter is not
selected by default.
Open do not
disturb right
Specifies whether the do-not-disturb
function is available to all users.
If you enable this parameter, under
Advanced > Utilities, common users can
enable or disable the do-not-disturb
function. The do-not-disturb function
prevents you from being disturbed by
incoming calls.
This parameter is selected
by default.
Call parameter
configuration
Specifies whether you can set the call type
and data transmission rate before initiating
point-to-point calls. If you select this
parameter, you can set the call type and
data transmission rate in the displayed
dialog box before initiating a point-to-point
call. If you do not select this parameter, the
endpoint uses the default call type and data
transmission rate.
This parameter is not
selected by default.
Wi-Fi network
preferred
Specifies whether to prioritize a Wi-Fi
network when both wireless and wired
networks are available.
This parameter is available only when
Wi-Fi is enabled. For details about how to
enable Wi-Fi, see 3.1.5 Setting Wi-Fi
Parameters.
This parameter is not
selected by default.
Default call
bandwidth
Specifies the default data transmission rate
for your endpoint.
NOTE
If this parameter is set incorrectly, the video
quality will be affected or the call might even
fail to be set up.
The default value is 1920
kbps.

Huawei TE40 Specifications

General

Brand	Huawei
Model	TE40
Category	Conference System
Language	English