Huawei TE40 Administrator's Guide

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
4 Display Device and Camera
Issue 01 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
46
Parameter
Description
Setting
changeable.

Intelligent stretch: Your endpoint
crops the video to an appropriate size
and stretches the video to full screen
with the original aspect ratio. For
example, to change a wide-screen
video to a narrow-screen video, your
endpoint crops the left and right edges
of the wide-screen video and stretches
the video to till the screen.
Automatic
layout mode
Specifies how your endpoint displays the
video and presentation.
NOTE
Only the main output port supports this
parameter.

Full screen: Your endpoint displays
the video or presentation in full screen
in the following priority sequence:
remote presentation, local
presentation, remote video, and local
video.

PiP: The Picture in Picture (PiP)
function is enabled to display the
video and presentation.

2 panes: The video and presentation
are displayed in two panes.

3 panes (a) or 3 panes (b): The video
and presentation are displayed in three
panes.
The default value is Full
screen.
Small window
position
Specifies the position of the PiP window
on the screen.
This parameter is available only when
Automatic layout mode is set to PiP.
NOTE
Only the main output port supports this
parameter.
The default value is Lower
right corner.
Display local
video
Display remote
video
Display
Presentation
Specify the content to be display through
a port.
You can select these three parameters for
video output ports, except Main output
interface and Auxiliary output port.
Choose whether to display
the local and remote videos
and presentations based on
your needs.
Step 4 Select Save.
----End

Huawei TE40 Specifications

General

Brand	Huawei
Model	TE40
Category	Conference System
Language	English