Huawei TE40 Administrator's Guide

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
5 Microphone and Speaker
Issue 01 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65
Parameter
Description
Setting
NOTE
This parameter is available only
when you select the 2 PC IN
port of the TE60 as the DP input
source.
LINE IN L (available
only for the TE50)
LINE IN R (available
only for the TE50)
Adjusts the input volume of
the LINE IN port at your site.
When you adjust this input
volume, the volume heard at
remote sites is adjusted
accordingly.
These parameters are selected
by default.
PSTN
Adjusts the volume of a
PSTN call at your site. When
you adjust this volume, the
volume heard at remote sites
is adjusted accordingly.
This parameter is selected by
default.
Gain
Adjusts the volume for the
MIC 1, MIC 2, RCA L, RCA
R, HDMI L, HDMI R, DP L,
DP R, LINE IN L, LINE IN
R, and PSTN ports.
Value range: -12 dB to +12
dB
The default value is +0dB.
Volume indicator
Displays volume in real time.
No default value is set for this
parameter.
Microphone array
battery level
Displays the microphone
array battery level in real
time.
No default value is set for this
parameter.
Switch controls

MIC array only: Your
endpoint can receive audio
signals collected by audio
input devices, excluding
the microphone array,
when you turn off the
microphone array.

All audio inputs: Your
endpoint cannot receive
audio signals collected by
any audio input devices
when you turn off the
microphone array.
To enable your endpoint to
receive audio signals again,
perform any of the following:

Press the button on the
microphone array to
enable this function.

Press the microphone
button on the remote
control to turn on the
The default value is All audio
inputs.

Huawei TE40 Specifications

General

Brand	Huawei
Model	TE40
Category	Conference System
Language	English