Huawei TE40 Administrator's Guide

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
6 Conference
Issue 01 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
79
Parameter
Description
Setting
Office Communications Server
(OCS) or Microsoft Lync Server.

CISCO VCS: Select this option if
your endpoint registers with the Cisco
TelePresence Video Communication
Server (VCS).

Standard: Select this option if your
endpoint registers with other SIP
servers.
Transmissio
n type
Specifies the protocol used for SIP
signaling transmission.

TCP: Use the Transmission Control
Protocol (TCP) to implement
transmission reliability.

UDP: Use the User Datagram
Protocol (UDP) to implement
transmission with reduced latency.

TLS: Use Transport Layer Security
(TLS) to implement transmission
security.
Set this parameter to UDP.
The IMS network only supports
UDP transmission.
Video
request
handling
Specifies how your endpoint handles
video requests from a remote endpoint
during a point-to-point SIP audio call or
multipoint conference.

Accept automatically: Your
endpoint automatically accepts video
requests from the remote endpoint.

Reject automatically: Your endpoint
automatically rejects video requests
from the remote endpoint.

Manual: Your endpoint prompts you
to accept video requests from the
remote endpoint.
The default value is Manual.
3. Choose Save.
Step 2 Press on the remote control to display the Call screen.
Step 3 In the text box, enter the conference unified access number.
Step 4 On the remote control, press or to initiate the conference.
Enter the required authentication information, such as the conference ID and password, as
prompted.
----End

Huawei TE40 Specifications

General

Brand	Huawei
Model	TE40
Category	Conference System
Language	English