Husqvarna P524 - Page 63

62 – English
1
2
3
1. Hydraulic adapter
2. Hydraulic adapter
3. Hydraulic adapter
Assembling
1. Assemble in reverse order. Start by retting any
remove hydraulic adapters. Torque tighten the
adapter on top (1) to 32 Nm. The two other
adapters (2) and (3) are tightened to 50 Nm.
2. Assemble the transmission with its three
retaining screws.
3. Assemble the hydraulic hoses and torque
tighten as instructed.
4. Insert the screw (1) for the recoil spring through
the link head (3). Assemble the spring (4),
washer (5) and nut (6).
5. Assemble the wheel speed adjuster (13) with
nut (7) and other components.
6. Check the oil level and top up if necessary as
specied in Technical Data.
7. Carry out all measures according to “5.2.10
Wheel speed” on page 39.
8. Run the machine and check for any leakage.
1. Screw
2. Nut
3. Link head
4. Spring
5. Washer
6. Nut
7. Nut
8. Screw
9. Link head
10. Plate
11. Bushing
12. Nut
13. Wheel speed adjuster
8095-338
7
8
10
9
12
11
13
1
3
2
4
6
5
8095-338
7
8
10
9
12
11
13
1
3
2
4
6
5
8095-338
7
8
10
9
12
11
13
1
3
2
4
6
5
Hydraulic system