40 ArcGlide THC Instruction Manual 806450
1 – Specifications
Lifter assembly (090053)
The following table lists specifications that are common for all lifter assemblies. Table 1 lists specifications that differ from
the model listed below.
Regulatory approvals CE, CSA, C-Tick, GOST-TR, UkrSEPRO
Motor 70 VDC, 3 A continuous, 6 A maximum
Limit switches +24 VDC
Motor Permanent magnet
Motor drive Pulse width modulation (PWM) servo amplifier
Lifter feedback Incremental encoder
Lifter limit switches Home switch and lower limit switch
Lifter control switches Manual UP/DOWN and station ENABLE/DISABLE switches
Maximum Z-axis speed 15,200 mm/min (600 in/min)
Maximum Z-axis stroke 239 mm (9.40 inch)
Breakaway switch +24 VDC
Motor brake +24 VDC
Laser pointer (Class 3B) +5 VDC
Maximum power: 500 mW
Wavelength: 400 – 695 nm
Lifter capacity 11.3 kg (25.0 lb)
To Next Page
Loading...
