5 Rampdown error
2 Common
3 Error
4 Common
6 Common
7 Not ready
8 Common
9 Spare in
14 Common
16 Not connected
12 Remote ON B
11 Remote ON A
14 Common
13 Common
16 Field +24 V out
15 Field +24 V out
1 Motion**
6 Hold B
5 Hold A
8 Plasma Start**
7 Plasma Start A**
10 Spare out B
9 Spare out A
DB37 to DB37 interface cable
(123760)
2 Corner B
1 Corner A
4 Pierce B
3 Pierce A
To terminal block 2,
pins 1 and 3
Electrode -
Work +
J2 Inputs
J3 Outputs
J2 Inputs
J3 Outputs
** Motion and Start are the minimum connections. Use other signals if they are
supported by the plasma system.
10 Common
11 Common
12 Common
13 Common
15 Not connected
Discrete plasma interface board (141094)
Arc voltage sense wires to
plasma system, use ~0.9 mm
2
(18 AWG) twisted pair wire,
rated 600 V or greater.
To plasma system Electrode-
To plasma system Work+
To Next Page
Loading...
Need help?
General
