Hypertherm HyPerformance Plasma HPR800XD - Page 54

InstallatIon
3-14 HPR800XD Auto Gas – 806500
 • Personnelshouldneverbeallowedtoplacethemselvesoranypartofthebodyundertheequipment,orbetween
the equipment and walls or other solid objects.
 • Storestrapsinapropermannersuchthattheyarenotsubjectedtomechanical,chemical,orultravioletdamage,
or to extreme temperatures.
In the United States, OSHA regulates slings in 29 CFR 1910.184. This regulation covers general requirements, basic
definitions, safe operating practices, and inspections of the various types of slings. Read the OSHA regulations and
OSHA sling guidelines carefully before moving the power supply, and observe all requirements and recommendations
for safe handling in 29 CFR 1910.184 and other applicable sections. If there is any question respecting the
interpretation or application of these or other OSHA regulations, you should consult appropriate legal counsel.
Hypertherm slings are not for sale in Europe, where locally purchased slings are required to have “CE Marking.” Inthe
UK the interpretation of the European Directives translated into the following UK Statutory Instruments (SI): SI 2306
PUWER, The Provision and Use of Work Equipment Regulations and SI 2307 LOLER, Lifting Operations Lifting
Equipment Regulations. Reference to the European Directives may not be construed to mean that the strap kit may
beused in other countries or jurisdictions.
The body responsible for the workplace where the equipment is to be installed needs to ensure all applicable local
regulations are followed, and Hypertherm assumes no responsibility or liability therefore. The customer assumes
exclusive responsibility for ensuring that all local laws and regulations are followed, including those applicable to the
useof equipment and work place conditions.