2-3
Calibration and Laser Adjustments
032-0330-EN Rev K
CAUTIONCAUTION
Ensure that the cover is positioned so that the side notches are toward the bottom of the panel.
1.
1
Remove beam limiter cover to gain access to
the crosshair laser. The cover is attached
magnetically.
Horizontal Line Adjustment:
2. Check height of horizontal crosshair line with
panel cover notches.
2
NOTCH
NOTCH
NOTCH
NOTCH
NOTCH
NOTCH
Horizontal
Vertical
Rotation
ADJUSTMENTS
To Next Page
Loading...
