To Next Page
K
Kristin FosterAug 11, 2025
What to do if the Link LED is OFF on my i3 International Switch?
- CCarlos CollinsAug 11, 2025
If the Link LED is OFF on your i3 International Switch, there are several things to check: * First, verify that both the switch and the devices connected to it are powered on. * Ensure that the cable is securely plugged into both the switch and the corresponding device. * If the switch is in a rack, inspect the connections to the punch-down block and patch panel. * Confirm that you are using the correct cable types and that their length does not exceed the specified limits. * Finally, check the adapter on the attached device and the cable connections for any defects, and replace any defective components.
General