i3 International Cortex S243 - MLD Snooping Group Information

171
MLD Snooping Status Parameters:
Items
Description
VLAND ID
The VLAN ID of the entry.
Querier Version
The currently working Querier version.
Host Version
Currently working Host Version.
Querier Status
Show the Querier status is “Active” or “Idle”.
“Disable” denotes the specific interface is administratively disabled.
Queries Transmitted
The number of Transmitted Queries.
Queries Received
The number of Received Queries.
V1 Reports Received
The number of Received V1 Reports.
V2 Reports Received
The number of Received V2 Reports.
Vi Leaves Received
The number of Received V1 Leaves.
Router Port
Displays which ports act as router ports. A router port is a port on the Ethernet switch that leads
towards the Layer 3 multicast device or MLD querier. Static denotes the specific port is
configured to be a router port. Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured to be a router port.
Port
The Switch port number.
Status
Indicates whether specific port is a router port or not.
Buttons
Auto-refresh: Check this box to refresh the page automatically. It will do so every 3 seconds.
Refresh: Click to refresh the page.
Clear: Clears the counters for the selected port.
MLD Snooping Group Information
This page will display the MSL Snooping Group Information. The starting point in the MLD group can be set with the ‘Start
from VLAN’ and ‘group address’ input fields.
To display the MSD Snooping Status in the web interface:
 Click Monitor / IPMC / MLD Snooping / Group Information
 Check the Auto-Refresh check box to have the page automatically refresh every 3 seconds.