i3 International Cortex S243 - Poe Auto Checking

97
PoE Configuration Parameters:
Items
Description
Power Supply Configuration
Port
This is the logical port number for this row.
Status
PoE Scheduling Status.
Enabled: Enable PoE Scheduling.
Disable: Disable PoE Scheduling.
Hour
The Time of the day the PoE Port is to provide power.
PoE Auto Checking.
This page allows the user to specify the auto detection parameters to check the linking status between PoE ports and PDs.
When it detects a fail to connect, it will reboot the powered device automatically.
To display Power over Ethernet Auto Checking in the web interface:
• Click Configuration / PoE / Auto Checking
• Enable the Ping Check function.
• Specify the Powered Device’s IP address, checking interval, retry time, failure action and reboot time.
• Click Apply and click the Save icon in the upper right corner to save the settings
PoE Auto Checking Configuration Parameters:
Items
Description
Power Supply Configuration
Ping Check
Enable Ping Check function can detect the connection between PoE port and power device. Disable
will turn off the detection.
Port
This is the logical port number for this row.