153
AAA Radius Overview Table Parameters:
The RADIUS server number. Click to navigate to detailed statistics for this server.
The IP address and UDP port number (in <IP Address> :< UDP Port> notation) of this server.
The current state of the server. This field takes one of the following values.
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS module is
ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did not reply within the
configured timeout. The server has temporarily been disabled, but will get re-enabled
when the dead-time expires. The number of seconds left before this occurs is displayed in
parentheses. This state is only reachable when more than one server is enabled.
AAA Radius Details
This page displays detailed statistics for a particular RADIUS server.
To display an AAA Radius details Table in the web interface:
Click Monitor / Security / AAA / Radius Details
Select the Server to be displayed from the drop down menu.
Check the Auto-Refresh check box to have the page automatically refresh every 3 seconds.
To Next Page
Loading...