i3 International Cortex S243 - Page 11

10
Classification
 Port based
 802.1p VLAN priority based
 IPv4/IPv6 precedence / DSCP based
 Differentiated Services (DiffServ)
 Classification and re-marking ACLs
Rate Limiting
 Ingress policer
 Egress shaping and rate control
 Per port
Management
DHCP Server
Support DHCP server to assign IP to DHCP clients
Zero Touch Upgrade
Upgrade single switch automatically when you get notification
Remote Monitoring (RMON)
Traffic on a port can be mirrored to another port for analysis with a network
analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be
mirrored to single destination port. A single session is supported.
Port Mirroring
Traffic on a port can be mirrored to another port for analysis with a network
analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be
mirrored to single destination port. A single session is supported.
UPnP
The Universal Plug and Play Forum, an industry group of companies
working to enable device-to-device interoperability by promoting Universal
Plug and Play
s-Flow
The industry standard for monitoring high speed switched networks. It gives
complete visibility into the use of networks enabling performance
optimization, accounting/billing for usage, and defense against security
threats
IEEE 802.1ab (LLDP)
 Used by network devices for advertising their identities, capabilities,
and neighbors on an IEEE 802ab local area network
 Support LLDP-MED extensions
Web GUI Interface
Built-in switch configuration utility for browser-based device configuration
CLI
For users to configure/manage switches in command line modes
Dual Image
Independent primary and secondary images for backup while upgrading
SNMP
SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-
based security model (USM)
Other Management
 HTTP
 DHCP Client/ DHCPv6 Client
 Cable Diagnostics
 Ping
 Syslog
 Telnet Client
 IPv6 Management
Power over Ethernet (PoE)
Port Configuration
Supports per port PoE configuration function
PoE Scheduling
Supports per port PoE scheduling to turn on/off the PoE devices (PDs).
Auto-checking
Check the link status of PDs. Reboot PDs if there is no responses.
Power Delay
The switch provides power to the PDs based on delay time when PoE
switch boots up, in order to protect switch from misuse of the PDs