40000088-00000000 Management Controller [arg1]: Configuration restoration from a file by user [arg2] completed.
Explanation: This message is for the use case where a user restores a Management Controller configuration from a
file and it completes.
May also be shown as 4000008800000000 or 0x4000008800000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0136
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000089-00000000 Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to
complete.
Explanation: This message is for the use case where a user restores a Management Controller configuration from a
file and the restoration fails to complete.
May also be shown as 4000008900000000 or 0x4000008900000000
Severity: Error
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0137
SNMP Trap ID: 22
Automatically notify Support: No
User response:
1. Turn off the server and disconnect it from the power source. You must disconnect the server from ac power to
reset the IMM.
2. After 45 seconds, reconnect the server to the power source and turn on the server.
3. Retry the operation.
4000008a-00000000 Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to
start.
Explanation: This message is for the use case where a user restores a Management Controller configuration from a
file and the restoration fails to start.
May also be shown as 4000008a00000000 or 0x4000008a00000000
Severity: Error
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0138
SNMP Trap ID: 22
Automatically notify Support: No
User response:
1. Turn off the server and disconnect it from the power source. You must disconnect the server from ac power to
reset the IMM.
40000088-00000000 • 4000008a-00000000
382
IBM System x3550 M4 Type 7914: Installation and Service Guide
To Next Page
Loading...
