816f0a0c-2005xxxx An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 5)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2005xxxx or 0x816f0a0c2005xxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2006xxxx An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 6)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2006xxxx or 0x816f0a0c2006xxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2007xxxx An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 7)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2007xxxx or 0x816f0a0c2007xxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2005xxxx • 816f0a0c-2007xxxx
Appendix A. Integrated management module II (IMM2) error messages 657