816f0a0c-2008xxxx An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 8)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2008xxxx or 0x816f0a0c2008xxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2009xxxx An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 9)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2009xxxx or 0x816f0a0c2009xxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-200axxxx An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 10)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c200axxxx or 0x816f0a0c200axxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2008xxxx • 816f0a0c-200axxxx
658
IBM System x3550 M4 Type 7914: Installation and Service Guide