IBM System x3550 M4 - Page 680

816f0a0c-2014xxxx An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 20)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2014xxxx or 0x816f0a0c2014xxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2015xxxx An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 21)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2015xxxx or 0x816f0a0c2015xxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2016xxxx An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 22)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2016xxxx or 0x816f0a0c2016xxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2014xxxx • 816f0a0c-2016xxxx
662
IBM System x3550 M4 Type 7914: Installation and Service Guide