Icom IC-910H - Front Panel Controls - Frequency and Satellite

6
2
PANEL DESCRIPTION
@4 RIT CONTROL [RIT] (p. 27)
Shifts the receive frequency without changing the
transmit frequency for the MAIN band only while
the RIT function is activated.
 •SSB/CWmode :±1.0kHz*in10Hzstep
 •FMmode  :±5.0kHz*in50Hzstep
  *For1200MHzband;±2.0kHzand±10.0kHz,respec-
tively when the optional UX-910 is installed.
 •ByusingtheSubdialfunction,theRITcontrolcanbe
used as the MAIN/SUB tuning dial or the SUB band IF
shift control. See page 24 for details.
@5 IF SHIFT CONTROL [SHIFT]
Shifts the center frequency of the receiver’s IF pass-
band within 1.2 kHz range.
 •ByusingtheSubdialfunction,theIFshiftcontrolcan
be used as the MAIN/SUB tuning dial or the SUB band
IF shift control. See page 24 for details.
 What is the Sub dial function?
The [RIT] and [SHIFT] controls are used for RIT and IF shift
controls for the MAIN band by default. However, the Sub dial
function assigns these controls as the MAIN/SUB tuning dial
or the SUB band IF shift control. (p. 24, 68)
RIT S H IFT
RIT S H IFT
RIT S H IFT
Center positionMax. counter-
clockwise position
Max. clockwise
position
@6 SATELLITE SWITCH [SATELLITE]
➥ Push to enter satellite mode (RX on
MAIN, TX on SUB band). Push again to
return to the condition before entering
into the satellite mode.
For 1 sec.
➥ Push to enter satellite mode using the
current operating frequencies when
pushing for 1 sec.
For 1 sec.
 •Tochangethenormalandreversesatellite
operations, push [F-INP/ENT] for 1 sec.
@7 RIT SWITCH [RIT] (p. 27)
➥ Push to switch the RIT control activity
ON and OFF.
  •“RIT”indicatorappearswhentheRITfunc-
tion is in use.
For 1 sec.
➥ Push for 1 sec. to switch the Sub dial
function ON and OFF.
  •“RIT” indicator flashes and the [RIT] and
[SHIFT] controllers acts as the controllers
specified in the RIT/SHIFT set mode. (p. 68)
@8 KEYPAD
Numeral and other function keys for tuning and ac-
tivating functions.
See the table at right.
n Front panel (continued)
@4
@5
@6
@8
@7