Icom IC-R20

51
10
SET MODE
DD
Priority watch
Turn the priority watch or priority beep (priority watch with
beep emission capability) ON. (default: OFF)
•ON: Start priority watch after exiting set mode.
• BELL : Emits beeps and blinking “S” indicator when
a signal is received on the priority frequency.
DD
Key-touch beep
The key-touch beep can be turned OFF for silent operation.
(default: ON)
DD
Beep output level
Adjust the key-touch beep tone level to the desired level
within 39 levels.
The key-touch beep (previous item) must be set to ON to
have a beep tone.
DD
Display backlighting
The receiver has display backlighting and function key illumi-
nation with a 5 sec. timer for night time operation. The back-
lighting can be turned ON continuously or turned OFF, if
desired.
• AUTO : Lights when some operation is performed, goes
out after 5 sec. (default)
•ON: Lights continuously during receiver power is ON.
• OFF : Never lights.
BACKLIGHT
>ON
-OFF
----------------
BACKLIGHT
-ON
-OFF
-AUTO
>AUTO
----------------
Auto setting
Continuously ON setting
BEEP-LEVEL
BEEP-LEVEL
Minimum level (no audio)
Maximum level
KEY-TOUTCH-BEEP
-ON
>OFF
----------------
KEY-TOUTCH-BEEP
>ON
-OFF
----------------
Key-touch beep OFF Key-touch beep ON
PRIORITY-WATCH
>ON
-OFF
----------------
PRIORITY-WATCH
-ON
-OFF
-BELL
>BELL
----------------
Priority watch ON Priority beep ON