67
11
OTHER FUNCTIONS
■ Partial reset
If you want to initialize the operating conditions (VFO fre-
quency, VFO settings, set mode contents) without clearing
the memory contents, a partial resetting function is available
for the receiver.
➥ While pushing [VFO MHz], turn the power ON to partially
reset the receiver.
■ All reset
The function display may occasionally display erroneous in-
formation (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting for a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
• Partial resetting is also available. See left for details.
IMPORTANT!:
Resetting the receiver (All reset) CLEARS all memory in-
formation and initializes all values in the receiver, includ-
ing TV channel skip setting.
➥ While pushing [VFO MHz] and [MR S.MW], turn the power
ON to reset the CPU.
To Next Page
Loading...
