VI
QUICK REFERENCE GUIDE
Quick reference guide
The IC-V85 has a total of 107 memory channels (including 6
scan edges and 1 call channel) for storing often used operat-
ing frequency, repeater settings, etc.
1. Setting frequency
In VFO mode, set the desired operating frequency with other
desired settings, such as repeater and subaudible tone.
2. Selecting a memory channel
➥ Push [FUNC] and [MR] then push
[
YY
] or [
ZZ
] several times to select
the desired memory channel.
•“
X
” indicator and memory channel
number blink.
3. Writing a memory channel
➥ Push [FUNC], then push and hold
[MR] for 1 sec. to program.
•3 beeps sound.
• Continue to push and hold [MR] for 1 sec. after 3 beeps are emit-
ted, to increment the displayed memory channel number.
To Next Page
Loading...
