Icom IC-V85 - 6 MEMORY;CALL OPERATION; MEMORY CHANNEL OVERVIEW, SELECTION, AND CALL CHANNEL

26
6
MEMORY/CALL OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Selecting a memory channel
qPush [MR] to select memory mode.
•“
X
” appears.
wEnter 2 digits to select the desired memory channel (or
push the [
YY
]/[
ZZ
] keys).
• The memory channels 0–9 are proceeded by a “0.”
• When [VOL] is assigned as tuning dial, rotate [VOL] to select
the memory channel. (pgs. 18, 53)
■ Selecting the call channel
➥ Push [CALL] to select the call channel.
• “C” is displayed instead of the memory channel number.
• Push [CLR] or [MR] to select VFO or memory mode, respec-
tively.
Push
CALL
B
“C” appears
Push
(Selection example: Memory channel 14)
DUP
TONE
4
1
Push
MR
C
The transceiver has 107 memory channels including 6 scan
edge memory channels (3 pairs), and 1 call channel. Each
of these channels can be individually programmed with op-
erating frequency (pgs. 17, 18), duplex direction (p. 22) and
offset (p. 23), subaudible tone encoder or tone squelch and
its tone frequency (pgs. 23, 40) and skip information* (p. 37).
*except for scan edge memory channels.
In addition, a total of 10 memory banks, A to J, are available
for usage by group, etc.
■ General description