Icom IC-V85 - BATTERY PACKS; EXTERNAL DC POWER OPERATION GUIDE

16
3
BATTERY PACKS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ External DC power operation
An optional cigarette lighter cable (CP-19R; for 12 V cigarette
lighter socket) can be used for external power operation.
DD
Operating note
• BE SURE to use optional CP-19R when connecting a regu-
lated 12 V DC power supply into the [DC 11V] jack of the
transceiver.
• The voltage of the external power supply must be within
11.7–15.9 V DC when using CP-19R.
• NEVER CONNECT OVER 16 V DC through CP19R.
Use an external DC-DC converter to connect the transceiver
through CP-19R to a 24 V DC power source.
• Disconnect the power cables from the transceiver when not
using it. Otherwise, the vehicle battery will become ex-
hausted.
• The power save function is deactivated automatically during
external DC power operation.
CP-19R (Optional)
to cigarette lighter
socket (12 V DC)
Transceiver
to
[DC 11V]