ID Technology ClearMark - Page 87

ClearMark™ Installation, Operation & User Manual – Page 87
V 1.S.10 January 2021
V-1.S.1
8. When finished, the Barcode can be edited from the “Composite creator assistant”. It is
recommended to edit with the “Barcode assistant”.
9. Set any items not that are not required to be printed as “not printable”.
10. Save the message and exit editor.
NOTE: It is possible to change the symbology of the barcode and reassign AI’s. If the
symbology is changed to a symbology without AI’s using the “Barcode assistant”, the AI’s and
the data source will be removed after saving the changes. The data will be the same.