iDect FC6A series User Manual

4: O PERATION B ASICS
4-2 FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722
PLC Selection
Before programming a user program on WindLDR, select a PLC type.
1. Select Configuration from the WindLDR menu bar, then select PLC Type.
The PLC Selection dialog box appears.
2. Select a PLC type in the selection box and the programming language to use.
3. Click OK.
PLC selection is now complete. Next, create a ladder program.
Select the PLC type from the list and click Use as
Default to set the selected PLC type as the default
type when WindLDR starts.
In WindLDR, the FC6A Series MicroSmart is categorized by the number of
inputs and outputs and the PLC type names are displayed as follows.
PLC Selection Option Type No.
FC6A-C16X1XE
FC6A-C16R1AE
FC6A-C16R1CE
FC6A-C16P1CE
FC6A-C16K1CE
FC6A-C24X1XE
FC6A-C24R1AE
FC6A-C24R1CE
FC6A-C24P1CE
FC6A-C24K1CE
FC6A-C40X1XE
FC6A-C40R1AE
FC6A-C40R1CE
FC6A-C40P1CE
FC6A-C40K1CE
FC6A-C40R1DE
FC6A-C40P1DE
FC6A-C40K1DE
FC6A-C40X1XEJ
FC6A-C40R1AEJ
FC6A-C40R1CEJ
FC6A-C40P1CEJ
FC6A-C40K1CEJ
FC6A-C40R1DEJ
FC6A-C40P1DEJ
FC6A-C40K1DEJ

iDect FC6A series Specifications

General

Brand	iDect
Model	FC6A series
Category	Controller
Language	English