iDect FC6A series User Manual

FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722 5-61
5: F UNCTIONS AND S ETTINGS
User Program Capacity
This section describes the function to select the user program capacity on the FC6A Series MicroSmart.
Function Description
If the default FC6A Series MicroSmart user program capacity is insufficient, you can secure a larger user program capacity.
However, Online Edit can no longer be used.
Programming WindLDR
Set the FC6A Series MicroSmart user program capacity.
1. On the Configuration tab, in the Function Area Settings group, click Device Settings.
The Function Area Settings dialog box is displayed.
2. For Program Capacity Selection, select 72,000 bytes, 384,000 bytes (All-in-One Type), or 640,000 bytes (CAN J1939 All-in-
One Type).
3. Click OK.
This concludes configuring the settings.
CPU Module Type
User Program Capacity
Default Capacity When Securing a Larger User Program Capacity
All-in-One Type
72,000 bytes
384,000 bytes
CAN J1939 All-in-One
Type
640,000 bytes

iDect FC6A series Specifications

General

Brand	iDect
Model	FC6A series
Category	Controller
Language	English