iDect FC6A series User Manual

FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722 7-9
7: HMI F UNCTION
Switching run/stop
This section describes how to run and stop the user program using the HMI module buttons.
Running the User Program
This section describes the steps to run the user program.
1. On the standard screen, press the (ESC) + (OK) buttons.
The system menu is displayed.
2. Select Run and press the (OK) button.
The user program is set to run.
Stopping the User Program
This section describes the steps to stop the user program.
1. On the standard screen, press the (ESC) + (OK) buttons.
The system menu is displayed.
2. Select Stop and press the (OK) button.
3. Select Yes with the (down) button and press the (OK) button.
The user program is set to stop.
Stopped
2015/DEC/01/TUE
13:30:40
Run
Edit Program
External Memory
Configurations
↓
Running
13:30:40
2015/DEC/01/TUE
When setting the user program to run by using the buttons on the HMI module, fully ensure the safety
before doing so.
Caution
Running
13:30:40
2015/DEC/01/TUE
Stop
External Memory
Device Monitor
Status Monitor
Do you want to
stop PLC?
No
Yes
↓
Stopped
2015/DEC/01/TUE
13:30:40

iDect FC6A series Specifications

General

Brand	iDect
Model	FC6A series
Category	Controller
Language	English