iDect FC6A series User Manual

FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722 7-5
7: HMI F UNCTION
About the Menu Screen
This section describes the menu screen displayed on the HMI module LCD.
When switching from the standard screen to the system menu screen, the menu items are displayed on the LCD.
Standard Screen
The standard screen is the screen that is displayed after the FC6A Series MicroSmart is turned on. It displays the operation status
(run/stopped) and the current date and time.
In the initial state, the English screen in the following diagram is displayed when the power is first turned on. To switch to the
Japanese menu, see "Changing the Menu Language" on page 7-12.
System Menu
On the standard screen, press the (ESC) button while pressing the (OK) button to display the system menu.
You can execute operations, such as running and stopping the user program, monitoring devices, and modifying the settings, on the
system menu. The menu items displayed on the LCD differ according to the operating status (running/stopped) of the user program.
■ System Menu when FC6A Series MicroSmart is stopped
The menu items displayed while the user program is stopped are as follows.
■ System Menu while FC6A Series MicroSmart is running
The menu items displayed while the user program is running are as follows.
Message Screen
TheFC6A Series MicroSmart can display messages on the HMI module LCD using the MSG (message) instruction. While the user
program is running, the message is displayed when the input conditions of MSG (message) instructions are ON. Multiple message
screens with different priorities can be switched and displayed with the (up) and (down) buttons.
• Run
• Edit Program
• External Memory
• Configurations
• Device Monitor
• Status Monitor
• Error Status
• Stop
• External Memory
• Device Monitor
• Status Monitor
• Error Status
Stopped
2015/DEC/01/TUE
13:30:40
Run
2015/DEC/01/TUE
13:30:40
㐠㌿୰೵Ṇ୰
ⅆ

ⅆ

English screen
Japanese screen
Run
Edit Program
External Memory
Configurations
Stop
External Memory
Device Monitor
Status Monitor
Stopped
Running
Run
Edit Program
External Memory
Configurations
Device Monitor
Status Monitor
Error Status
The symbol is displayed
when menu items continue below.
Stop
External Memory
Device Monitor
Status Monitor
Error Status
㸨
Insufficient parts
㸨
Manu. Line Process 1
2015/DEC/01
Message screen
Priority: 0
Priority: 1
Supply parts
Production count
Type A: 100 pcs.
Type B: 300 pcs.

iDect FC6A series Specifications

General

Brand	iDect
Model	FC6A series
Category	Controller
Language	English