iDect FC6A series User Manual

FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722 12-1
12: EXPANSION MODULE AND CARTRIDGE SETTINGS
This chapter provides a description of the expansion module and cartridge settings that configure the usage of expansion modules
and cartridges.
Expansion Module and Cartridge Settings Overview
The FC6A Series MicroSmart is capable of using the expansion modules and cartridges described in "Product Specifications" on
page 2-1. To use expansion modules and cartridges, they must be configured to connect to the FC6A Series MicroSmart using the
WindLDR Module Configuration Editor.
Module Configuration Editor Structure
The Module Configuration Editor is composed of the following three areas.
The module configuration that will be used is created by selecting the expansion modules and cartridges to use in the expansion
modules and cartridges list and dragging and dropping them to the module configuration area.
Module configuration area : Displays the configuration of connected expansion modules and cartridges.
Expansion modules and cartridges list : Displays a list of expansion modules and cartridges that can be connected to the FC6A
Series MicroSmart.
Parameter reference area : Displays the parameters that are configured for the expansion modules and cartridges.
Parameter Reference Area
Expansion Modules and Cartridges List
Module Configuration Area

iDect FC6A series Specifications

General

Brand	iDect
Model	FC6A series
Category	Controller
Language	English