iDect FC6A series User Manual

11: SD M EMORY C ARD
11-36 FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722
Editing a ZLD File Using WindLDR
ZLD files are edited with the following procedure.
1. Click (application) > Open > PLC Program.
The Open dialog box is displayed.
2. Select the ZLD file to edit and then click Open.
The PLC Program Configuration dialog box is displayed.
3. Edit the ZLD file details on the ZLD File tab.
4. Click OK.
This concludes editing a ZLD file.

iDect FC6A series Specifications

General

Brand	iDect
Model	FC6A series
Category	Controller
Language	English