FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
U
SER
’
S
M
ANUAL
FC9Y-B1722 11-39
11: SD M
EMORY
C
ARD
Starting and Exiting Data File Manager
â– Starting Data File Manager
When a CPU module with an inserted SD memory card is connected to a PC, Data File Manager can be started for editing.
1. On the Online tab, in the PLC group, click Maintenance and then Data File Manager.
Notes:
• A connection cannot be made using the pass-through function. Clear the Use HGxG Pass-Through check box.
• A connection cannot be made using the maintenance function over Modbus TCP. When the communication method is Serial, clear the Use
maintenance communication over Modbus TCP check box.
• Data File Manager can be opened independently without starting WindLDR. The procedure to open Data File Manager independently is as
follows.
• Windows 8
Click Data File Manager in the tiles on the Start screen.
• Windows 7, Windows Vista
Click Start > Programs > Automation Organizer > Utilities > Data File Manager > Data File Manager.
• Windows XP
Click Start > All Programs > Automation Organizer > Utilities > Data File Manager > Data File Manager.
• The standalone Data File Manager application can be downloaded from the IDEC homepage (at the following URL) free of charge.
http://jp.idec.com/ja/download/search.aspx?category=&tab=software
Data File Manager starts.
To Next Page
Loading...
Need help?
General