13: T
ROUBLESHOOTING
13-24 FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
U
SER
’
S
M
ANUAL
FC9Y-B1722
Checking the USB Driver
You can use the following procedure to check whether the USB driver has been installed correctly and whether the FC6A Series
MicroSmart has been recognized correctly.
1. Display Device Manager.
• Windows 8
On the Start screen, right-click the background, and then click All apps > Control Panel > Hardware and Sound.
In the Hardware and Sound dialog box, click Device Manager.
• Windows 7
Click the Start button > Control Panel > System and Security > Device Manager.
• Windows Vista
Click the Start button > Control Panel > System and Maintenance > System > Device Manager.
If the User Account Control dialog box appears, click Continue.
• Windows XP
Click the Start button > Control Panel > Performance and Maintenance > System.
On the Hardware tab of the System Properties dialog box, click Device Manager.
2. Click Ports (COM & LPT).
If the following device name is displayed, the USB driver has been installed correctly and the FC6A Series MicroSmart has been
recognized correctly.
"IDEC PLC USB Port (COMx)"
Notes:
• The device name will disappear if you disconnect the USB cable or turn off the FC6A Series MicroSmart.
• If "Unknown device" is displayed for the device name or if a question mark is displayed when the FC6A Series MicroSmart is on and the USB
cable is connected, the USB driver may not have been recognized correctly. Remove the USB cable, turn the FC6A Series MicroSmart off, turn
the FC6A Series MicroSmart on again and connect it, and then check if the USB driver is recognized. If the USB driver still is not recognized,
use Device Manager to delete the USB driver, and then reinstall it.
To Next Page
Loading...
Need help?
General