iDect FC6A series - Page 467

FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722 A-17
A PPENDIX
Writing/Clearing TP (Timer Preset Values) and CP (Counter Preset Values) in the User Program
Stopping Access to the SD Memory Card/Formatting the SD Memory Card
Configuring the Slave Number
Configuring the Network Settings
Run
Edit Program
External Memory
Configurations
T/C Preset Values
T/C Change Status:
T/C is changed
Clear
Comfirm
Stop Access
Format
Recipe
Program
Stop Access
Format
Recipe
Program
Do you want to
format SD card?
No
Yes
Run
Edit Program
External Memory
Configurations
SD Card
Do you want to stop
SD card access?
No
Yes
Run
Edit Program
External Memory
Configurations
Function
Clock
Menu Languages
Backlight
Communications
Message Settings
Slave Number
CPU Network Settings
HMI Network Settings
Port 1:
0
Port 2:
0
Slave Number
CPU Network Settings
HMI Network Settings
Slave Number
CPU Network Settings
HMI Network Settings
Run
Edit Program
External Memory
Configurations
Function
Clock
Menu Languages
Backlight
Communications
Message Settings
Subnet Mask:
255.255.255. 0
Default Gateway:
0. 0. 0. 0
CPU Network Settings
Setting: Fixed
IP Address:
192.168. 1. 5
CPU Network Settings
Setting: Fixed
IP Address:
192.168. 1. 5
Slave Number
CPU Network Settings
HMI Network Settings
Subnet Mask:
255.255.255. 0
Default Gateway:
0. 0. 0. 0
HMI Network Settings
Setting: Fixed
IP Address:
192.168. 1. 10
Subnet Mask:
255.255.255. 0
Default Gateway:
0. 0. 0. 0
Subnet Mask:
255.255.255. 0
Default Gateway:
0. 0. 0. 0
HMI Network Settings
Setting: Fixed
IP Address:
192.168. 1. 10
Preferred DNS Server:
0. 0. 0. 0
Alternate DNS Server:
0. 0. 0. 0
Preferred DNS Server:
0. 0. 0. 0
Alternate DNS Server:
0. 0. 0. 0
Preferred DNS Server:
0. 0. 0. 0
Alternate DNS Server:
0. 0. 0. 0
Preferred DNS Server:
0. 0. 0. 0
Alternate DNS Server:
0. 0. 0. 0