2: P
RODUCT
S
PECIFICATIONS
2-58 FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
U
SER
’
S
M
ANUAL
FC9Y-B1722
Function Specifications
■ Power Supply Specifications
■ Input Specifications
Operating Ranges
The operating range of Type 1 (IEC 61131-2) input modules is as follows.
Type No. FC6A-M08BR1 FC6A-M24BR1
Points
Input Points 4 (4 points in 1 common line) 16 (16 points in 1 common line)
No. of Outputs 4 (4 points in 1 common line) 8 (4 points in 1 common line)
Terminal Arrangement See 2-61 See 2-62
Connector
Insertion/Removal
Durability
100 times minimum
Internal
Current Draw
All Points ON
30 mA (5V DC)
25 mA (24V DC)
55 mA (5V DC)
50 mA (24V DC)
All Points OFF
17 mA (5V DC)
0 mA (24V DC)
Module Internal Power Consumption
: All Points ON, Calculated at 24V DC
0.75 W 1.48 W
Weight Approx. 120 g Approx. 165 g
Type No. FC6A-M08BR1 FC6A-M24BR1
Rated Input Voltage 24V DC shared sink/source
Operating Load Voltage Range 0.0 to 28.8V DC
Rated Input Current 7 mA/point (at 24V DC)
Input Impedance 3.4 kΩ
Input Delay
Time (24V DC)
Turn ON Time 4.1 ms
Turn OFF Time 4.1 ms
Isolation
Between Channels Not isolated
Internal Circuit Photocoupler isolated
External Load for I/O Interconnection Not needed
Signal Determination Method Static
Effect of Improper Input Connection
Sinking connections or source connections are allowed.
If any input exceeding the rated value is applied, permanent damage may be caused.
Cable Length 3 m
FC6A-M08BR1, FC6A-M24BR1
Transition
Area
ON Area
OFF Area
4.2 mA
8.4 mA
Input Current (mA)
5 V
15 V
24 V
Input Voltage (V DC)
28.8 V
1.2 mA 7.0 mA
To Next Page
Loading...