iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual xi
About This Manual
Thank you for purchasing an Evolution 8000 Series Satellite Router. This manual provides
important safety and compliance information, and explains how to install and maintain an
Evolution 8000 Series Satellite Router. This manual covers both the e8350 Satellite Router and
iCONNEX e800 models.
This chapter contains:
• Intended Audience
• Manual Contents
• Document Conventions
• Safety Definitions
• Disclaimer
• iCONNEX e800 Warranty, Restrictions and Disclaimer
• Getting Help
Intended Audience
This manual is intended for use by the VSAT (Very Small Aperture Terminal) equipment
installer, system engineer, or network operator responsible for maintaining the iDirect
Network. Only qualified service personnel should install and operate the Evolution 8000 Series
Satellite Router. Familiarity with cabling and wiring practices is beneficial.
Manual Contents
In addition to the information in this chapter, this manual also includes:
• Chapter 1, Introduction provides an overview and description of the e8350 and e800
models included in the Evolution 8000 Series Satellite Router product line.
• Chapter 2, Safety Information describes general cautions for the Evolution 8000 Series
Satellite Router.
• Chapter 3, Evolution 8000 Series Specifications covers the mechanical, environmental
and connector interface requirements for the Evolution 8000 Series Satellite Router.
To Next Page
Loading...
