iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual 57
Configuring a Mobile Remote
6.3 Configuring a Mobile Remote
The iCONNEX e800 is configured as a mobile remote by using iBuilder. Refer to the iBuilder
User Guide for information on configuring a mobile remote.
6.4 Monitoring a Mobile Remote
The current location of an iCONNEX e800 mobile remote can be monitored in iMonitor in the
Event Window for the remote. The remote periodically updates the NMS with its current
location. If the location data is not current, the remote informs the NMS that the location is
not available.
To Next Page
Loading...
