iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual 3
2 Safety Information
Follow the safety guidelines in this chapter carefully during installation of your Evolution 8000
Series Satellite Router. These guidelines help protect the satellite router from potential
damage and help ensure your own personal safety. These safety measures are translated into
multiple languages (see Appendix A, Warnings for the e8350 Satellite Router). Keep this
safety information handy where you can easily refer to it.
Read this entire chapter before you attempt to install or use your Evolution 8000 Series
Satellite Router. Adhere to all warnings listed on the product’s warning labels and in the
operating instructions, and follow all operating and usage instructions carefully.
Note: See “Safety Definitions” on page xii for a description of the warning icons that
are used in this manual.
This chapter contains:
• Installation Guidelines
• Electrical Safety
• Physical and Environmental Considerations
• Operational and Maintenance Safety
• Safety Guidelines to Observe During Servicing
2.1 Installation Guidelines
When installing the Evolution 8000 Series Satellite Router, observe all caution and warning
statements. Follow the general warnings and cautions to help ensure your safety and protect
the equipment. However, these guidelines may not cover all of the potentially hazardous
situations you may encounter during installation.
The installation of the Evolution 8000 Series Satellite Router must comply with the national
and local electrical codes, as follows:
• In the United States, the National Fire Protection Association (NFPA) 70, United States
National Electric Code
• In Canada, the Canadian Electric Code, Part 1, CC22.1
• In other countries, the International Electromechanical Commission (IEC)
Recommendation 364, part 1 through part 7
To Next Page
Loading...
