iDirect Evolution 8000 Series - RF Specifications; Table 4. E8350 Satellite Router RF Specifications

iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual 11
e8350 Satellite Router Specifications
3.1.3 RF Specifications
Ensure that installation site can accommodate the RF specifications for the e8350 Satellite
Router as defined in Table 4.
Protection Internal, primary current fuse, inside power supply
Over current protection
Short protection
Power Factor Correction Complies with EN61000-3-2 and EN61000-3-3
Efficiency 86% typical
Input Transient Response 0.5 msec for 50% load change typical
AC Input Connector IEC-320-C14
AC Power Cord 18 AWG, country dependent
Table 4. e8350 Satellite Router RF Specifications
Category Description
Frequency Range
Transmit:
Receive:
950-2000 MHz
950-2000 MHz
Frequency Tuning Step Size
Transmit:
Receive:
38 Hz
Sub-Hertz with demodulator
RF Power Range
Transmit:
Receive:
-35 dBm to +5 dBm
-65 dBm to +0 dBm composite
RF Power Adjustability
Transmit:
Receive:
0.5 dB nominal step size
Under AGC for all valid Rx input power range
Typical Transmit and Receive
Phase Noise (dBc/Hz) at:
Typical Phase Jitter at
14 KHz to 1 MHz:
≤ 1.8° rms
Table 3. e8350 Satellite Router Power Specifications (continued)
Category Description
Frequency Phase Noise
1 KHz -83
10 KHz -83
100 KHz -96
1 MHz -112