iDirect Evolution 8000 Series - Iconnex E800 Satellite Router Remote ON;OFF Switch Connector; Iconnex E800 Satellite Router Remote LED Connector; Figure 21. JP1 Pin Numbering; Figure 22. JP2 Pin Numbering

46 iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual
Power Connectors
5.2.1 iCONNEX e800 Satellite Router Remote ON/OFF Switch
Connector
The iCONNEX e800 Satellite Router JP1 ON/OFF switch connector and pin assignments are
shown in Figure 21 and Table 19.
Figure 21. JP1 Pin Numbering
5.2.2 iCONNEX e800 Satellite Router Remote LED Connector
The iCONNEX e800 Satellite Router JP2 Remote LED connector and pin assignments are shown
in Figure 22 and Table 20:
Figure 22. JP2 Pin Numbering
Table 19. JP1 Pin Assignments
Pin Signal
1 Open Pin = Power On
Grounded Pin = Power Off
2 Not Connected
3 Ground
Table 20. JP2 Connector Pin Assignments
Pin Signal Name
1INPUT PWR
2GROUND
3RMT STAT LED RED
4RMT STAT LED GRN
5RMT NET LED YEL
6RMT NET LED GRN
7 RMT TX LED YEL