xiv iDirect Evolution X1 Outdoor Satellite Router Installation and Safety Manual
The following appendixes are also provided:
• Appendix A, Warnings describes warnings to be heeded to prevent personal injury or
equipment damage.
• Appendix B, Compliance provides compliance information.
• Appendix C, Preparing the Coax Cable provides instructions for preparing coax cabling.
Document Conventions
This section illustrates and describes the standard conventions used throughout this
document. Review the documentations conventions table prior to using this manual—it
provides information on how to interpret standard conventions used in iDirect documents.
Convention Description Example
Blue
Courier
font
Used when the user is
required to enter a command
at a command line prompt or
in a console)
[SWITCH_PORT_n]
vid = vlan_id
Courier
font
Used to show the resultant
output from a command
entered at a command line or
on a console.
Output similar to the following sample appears:
[SECURITY]
password =
$idi2$/bFMhf$5H8mYAaP1sTZ0m1Ny/dYyLaS40/
admin_password =
$idi2$146rgm$.KtDb4OH5CEBxzH6Ds2xM.ehHCH
os_password =
$1$UTKh0V$cc/UfNThFmBI7sT.zYptQ0
Bold
Trebuchet
font
Used when the user must
type information or values
into a field in a Windows-
type interface software.
Used when specifying names
of commands, menus,
folders, tabs, dialogs, list
boxes, and options.
1.To add a remote to an inroute group, right-click
the Inroute Group and select Add Remote.
The Remote dialog box has a number of user-
selectable tabs across the top. The Information Tab
is visible when the Dialog opens.
Blue italics
Trebuchet
Used to show hyperlinked
text within a document.
For instructions on performing specific tasks on a
remote, see “Using the Remote Probe” on page 59.
Bold italic
Trebuchet
Used to emphasize
information for the user, such
as in notes.
Note: The Tx Power for a remote cannot be set
outside of the Min/Max range defined in
iBuilder.
To Next Page
Loading...
